Online Comptia Certification Exam Braindumps–Pass4side

1. Which two ports must 70-271 be enabled to establish communication between GTM Systems and other BIG-IP Systems?? (Choose two.)
A.22
B.53
C.443
D.4353
E.4354
Answer: AD?

??

2. When initially configuring the GTM System using the config tool, which two parameters can be set? (Choose two.)HP0-A03
A.System hostname
B.IP Address of management port
C.IP Address of the external VLAN
D.Default route for management port
E.Port lockdown of management port
Answer: BD??

?

3. If the config tool is complete, which three access methods are available by default for GTM administration and configuration on 520/540 platforms? (Choose three.)
A.network access via http
B.network access via https
C.network access via telnet? HP0-055
D.direct access via serial port
E.direct access via keyboard and monitor
Answer: BDE?

??

4. What must be sent to the license server to generate a new license?
A.the system's dossier
B.the system's base license
C.the system's serial number
D.the system's purchase order number
Answer: A?? 70-271

?

5. After licensing the GTM System, what must be performed to complete activation?
A.reboot of system
B.manual restart of gtmd
C.manual restart of tmm
D.enter the command bigstart restart
Answer: A??? HP0-A03

?

6.What is the theoretical total convergence time when 802.1D STP has to recalculate its tree because of a failure of the root bridge??

A: 15 seconds

B: 30 seconds

C: 50 seconds

D: 60 seconds

Correct Answers:? C

?

7.What happens when one executes the CLI command: unconfigure switch all?HP0-055?

A: Resets configuration to factory defaults without a reboot

B: Erases the entire current configuration without a reboot

C: Erases the configuration selected for next reboot, resets to factory defaults and reboots the switch

D: Erases both configurations and reboots the switch HP0-A03

Correct Answers:? C

?

8.The CLI Command ?7KH&/,&RPPDQGdisable learning ports 1?will do the following on an Extreme switch:?

A: disable MAC address learning for port 1

B: disable link detection for port 1

C: disable STP learning on port 1

D: None of the above

Correct Answers:? AHP0-055

?

9.Which CLI command would you use to add a VLAN to a newly created STPD s1??

A: config stpd s1 add vlan <vlan>

B: config s1 stpd add vlan <vlan>

C: config stpd add s1 vlan <vlan>

D: config s1 add stpd vlan <vlan>

Correct Answers:? A70-271

?

10.What is the maximum number of simultaneously active protocol filters in the switch for all ?based Extreme switch products??

A: 7

B: 14

C: 15

D: None of theseHP0-A03

Correct Answers:? C

?

11.The Summit 7i has a capacity of 64Gbps and can forward 48 million packets per second.?

A: TRUE

B: FALSE70-271

Correct Answers:? A

?

12.A 802.1Q tag is a marker inserted between the source and destination MAC addresses fields of the Ethernet frame.?

A: TRUE

B: FALSE

Correct Answers:? B

?

13.If you wish to silently drop all traffic destined for HP0-055 IP network 100.219.10.0/24 with a gateway of 10.219.10.1/24 and without receiving any ICMP messages that would otherwise be generated, which CLI command would you execute??

A: configure iproute delete 100.219.10.0/24 gateway 10.219.10.1

B: configure iproute default 100.219.10.0/24

C: configure iproute add blackhole 100.219.10.0/24 gateway 10.219.10.1

D: configure iproute add blackhole 100.219.10.0/24

Correct Answers:? D?

Powered by MightyAdsense